This customer brought in their 1992 BMW 380i for a complete car paint job. They chose our Enamel Single Stage paint with our Basic sealer. We repaired a dent on the driver side fender, dents on both left and right doors and stress cracks and a gouge on the rear bumper. Once repairs were completed we sanded the delaminating (peeling) paint and it was ready for the paint booth. The customer was thrilled with the results and the 850i was back on the road!
Coupons for great discounts on auto paint, rental cars and bumper paint. Pick the one that gives you the best deal!
Coupons for great discounts on auto paint, rental cars and bumper paint. Pick the one that gives you the best deal!
This customer brought in their 2017 Honda Accord LX for a rear bumper repair. We also replaced the rear reinforcement bar, rear left bumper bracket and the rear bumper molding. Once we removed the damaged parts we prepped the replacement parts and got them into the paint booth. Once they were cured we installed them onto the vehicle and it was good as new!
This customer brought in their 2015 Lexus ES350 for a front bumper repaint. The customer had applied touch up paint to the chips in the bumper caused by rocks. We sanded off all the touch up paint and smoothed out the surface so it would be ready for primer. Per the customer's request, all the trim and lights were masked off to reduce cost. Once the paint was cured we removed the masking tape and the bumper looks as good as new!
This customer bought in their 2011 Hyundai Elantra for a out of pocket spot repair on the front bumper and the passenger fender. We sanded out the gouges on the front bumper and replaced the passenger side fender. Once both parts were prepped they went in for paint. After the paint was cured we installed both parts and it was as good as new!
This customer brought in his 2010 Audi S5 for an insurance repair. We fixed damage to the left bodyside panel and the left quarter panel extension. We also had to replace the quarter panel duct, trunk lid, the S5 badge on the trunk lid, both of the outer and inner taillights, both the left and right bumper brackets, the lower molding on the rear bumper and finally the rear spoiler. After all the repair and repainting was finished we preformed a sheet metal pull on the vehicle to make sure everything was aligned and ready to be back on the road!
