This customer brought in their 2016 Mazda3 Sport for a front bumper replacement. When damage is too severe on plastic pieces such as bumpers we recommend to the customer that they replace the bumper. The customer approved an aftermarket replacement which we prepped for paint. Once it was cured we installed it on the car and it looked like the damage never happened.
This customer brought in their 2017 Honda Accord LX for a rear bumper repair. We also replaced the rear reinforcement bar, rear left bumper bracket and the rear bumper molding. Once we removed the damaged parts we prepped the replacement parts and got them into the paint booth. Once they were cured we installed them onto the vehicle and it was good as new!
This customer brought in his 2013 Subaru BRZ for a collision damage repair. We replaced the front bumper, the front bumper emblem, belt molding on the front left door and the paint protection film on both the left and right quarter panel. We did some dent repairs to the front left door near the door handle, reconditioned the paint failure on the left quarter panel and a dent on the right quarter panel near the roof rail. Lastly we installed customer supplied taillights after the repairs and painting were completed.
This customer brought in his 2013 BMW M5 for repainting of his mirrors, repairing the front bumper and painting the rear spoiler. He chose our "Best Way" option by removing any unpainted parts touching the panels we were painting. We removed emblems, grilles, sensors and reflectors from the front bumper. We painted and installed both left and right mirrors that the customer supplied. Lastly we painted and installed the rear lower spoiler. The customer also chose to use our "Wet Sand & Polish" to remove any dust specs in the paint after everything cured. After assembling the car looked brand new and ready to go home!
This customer brought in their 2012 Honda Civic for a two tone paint job. The customer requested that we paint the windshield pillars both left and right, roof and top of the trunk lid. We reconditioned the delaminating paint on these pillars and masked the rest of the car that was not getting painted. Once the paint was sprayed and baked for durability we removed the masking tape and it was ready for pickup.
