This customer brought in their 1992 BMW 380i for a complete car paint job. They chose our Enamel Single Stage paint with our Basic sealer. We repaired a dent on the driver side fender, dents on both left and right doors and stress cracks and a gouge on the rear bumper. Once repairs were completed we sanded the delaminating (peeling) paint and it was ready for the paint booth. The customer was thrilled with the results and the 850i was back on the road!
This customer brought in their 2016 Toyota Camry for an insurance repair on the front left door. Another vehicle drove into their door while it was being opened. We replaced the door and transferred all the mechanisms over to the new door. After removing the part we noticed there was a dent on the pillar where the hinges are mounted. We did some repairs there as well, painted and it was as good as new!
This customer brought in their 2003 BMW 325ci for an Enamel Single Stage Paint job. We preformed repairs to the front bumper, hood, right fender, left front door and rear bumper. We also replaced the left fender. The customer decided on our Enamel Single Stage paint with our Basic sealer and our Minor Chip & Scratch sanding option. This is where we sand out any minor chips and scratches around the vehicle.
This customer brought in his 1997 Honda Accord for an overall paint job and a rear left door replacement. We also performed some repairs to the driver side quarter panel and trunk lid. The customer chose our Urethane Single Stage option with a Urethane Sealer. We also sanded out minor chips and scratches around the body of the car.
This customer brought his 1999 Acura Integra for a Urethane single stage paint job. The customer wanted us to sand off the peeling paint, and the chips and scratches around the car. The customer had us perform selective dent repair on the passenger side fender, passenger side door and the tailgate. The fresh coat of paint brought this vehicle back to life!
