This customer brought in their 2017 Honda Accord LX for a rear bumper repair. We also replaced the rear reinforcement bar, rear left bumper bracket and the rear bumper molding. Once we removed the damaged parts we prepped the replacement parts and got them into the paint booth. Once they were cured we installed them onto the vehicle and it was good as new!
This customer brought in a 2008 Lexus ES350 for an overall paint job and part replacement. We replaced all the front bumper retainers, the left obstacle sensor and both the left and right lower engine covers. The customer approved sanding for the delaminating paint/peeling paint and sanding out any minor chips and scratches around the vehicle. He also wanted to change the color to Sherwin Williams 42193 "Green Metallic". We also reconditioned rust that was on the hood. The customer chose our Enamel single stage paint with our basic primer. Once the car was prepped we masked it with paper and tape and it was ready for paint. We think changing the color to this vibrant green gave the Lexus a whole new look!
This customer brought in their 2006 Buick LaCrosse for an overall paint job. The customer approved sanding of the delaminating paint (peeling paint), trim black on the door appliques and a headlight restoration. They also chose our Urethane base coat/clear coat paint with our Urethane primer. We sanded and smoothed out any chips and scratches around the car along with the peeling clear coat. Once prep was done the trim was masked off with paper and tape and it was ready for paint.
This customer brought in their 2016 Mazda 3 for an out of pocket repair. We replaced the front bumper, front reinforcement bar, left front bumper retainer, front bumper absorber, Upper grille, both left and right grilles, front emblem and countless more. Once the old parts were removed and the new ones were installed we prepped it got it ready for paint and it was back on the road like new!
This customer brought in their 2016 Toyota Camry for an insurance repair on the front left door. Another vehicle drove into their door while it was being opened. We replaced the door and transferred all the mechanisms over to the new door. After removing the part we noticed there was a dent on the pillar where the hinges are mounted. We did some repairs there as well, painted and it was as good as new!
This customer brought in their 2003 BMW 325ci for an Enamel Single Stage Paint job. We preformed repairs to the front bumper, hood, right fender, left front door and rear bumper. We also replaced the left fender. The customer decided on our Enamel Single Stage paint with our Basic sealer and our Minor Chip & Scratch sanding option. This is where we sand out any minor chips and scratches around the vehicle.
