This customer brought in their 2016 Mazda3 Sport for a front bumper replacement. When damage is too severe on plastic pieces such as bumpers we recommend to the customer that they replace the bumper. The customer approved an aftermarket replacement which we prepped for paint. Once it was cured we installed it on the car and it looked like the damage never happened.
This customer brought in their 2016 Mazda 3 for an out of pocket repair. We replaced the front bumper, front reinforcement bar, left front bumper retainer, front bumper absorber, Upper grille, both left and right grilles, front emblem and countless more. Once the old parts were removed and the new ones were installed we prepped it got it ready for paint and it was back on the road like new!
This customer brought in his 2008 Toyota Yaris for an insurance repair. We replaced the front bumper, and driver side bumper retainer, we also adjusted both hood hinges to ensure the fitment was back to factory after the collision. Once the front bumper was done being prepped and painted we installed it and it was back to looking brand new!
This customer brought in his 2013 Subaru BRZ for a collision damage repair. We replaced the front bumper, the front bumper emblem, belt molding on the front left door and the paint protection film on both the left and right quarter panel. We did some dent repairs to the front left door near the door handle, reconditioned the paint failure on the left quarter panel and a dent on the right quarter panel near the roof rail. Lastly we installed customer supplied taillights after the repairs and painting were completed.
This customer brought in his 2005 Mazda Miata for an overall paint job. We also replaced the driver side window regulator, and rear bumper cover. The customer decided to go with our Two Stage Urethane Base Coat/Clear Coat paint. We also sanded out any minor chips and scratches around the car and the delaminating paint on the top of the car. First we replaced the window regulator to avoid scratching fresh paint. After we started the sanding process, once everything was completed we masked off anything that was not being painted the same color of the car, and it was ready for paint! Looks like a brand new car!
This customer brought in their 2008 Nissan Versa for a spot repair on the front end of the vehicle. We replaced the following parts on the front end of the vehicle: front bumper, front reinforcement bar, front bumper absorber, both right and left bumper brackets, left headlight, left upper radiator support and lastly left fender. Once the old parts were removed and the new parts were installed we painted the front bumper, installed the new headlight and it was ready to go home!
