This customer brought in their 2020 Nissan Altima for a hood repaint. We reconditioned the "delaminating" or peeling paint on the front left corner. Per the customer's request we masked off the trim and headlights to reduce cost. Once the sanding was completed and the paint was cured we removed the masking tape and the hood looked as good as new!
This customer brought his 1999 Acura Integra for a Urethane single stage paint job. The customer wanted us to sand off the peeling paint, and the chips and scratches around the car. The customer had us perform selective dent repair on the passenger side fender, passenger side door and the tailgate. The fresh coat of paint brought this vehicle back to life!
This customer brought in his BMW 540i for an overall paint job. We did some repairs to the hood near the emblem location. We also installed customer supplied grille inserts. Customer approved replacement of the rear bumper as well. The customer chose our Enamel Single stage paint and our basic sealer. We also sanded out any minor chips and scratches around the vehicle while also sanding out Delaminating (peeling) paint as well. Once the vehicle was done in prep, we masked and it was ready for paint. The fresh coat of paint definitely brought life back to it! Looks like new!
This customer brought in his 2004 Infiniti G35 for an overall paint job. The customer wanted us to repairs to the front bumper and the rear bumper. We also repaired a crease on the right fender. The customer chose our Enamel Single Stage Paint, and sanding off any delaminating paint on the roof only. The customer wanted us to Gloss Trim Black the roof, rear spoiler and mirrors. He also wanted to do a color change on the exterior only to Sherwin Williams "Gloss Grey" color code: 50751.
This customer brought in his 2005 Mazda Miata for an overall paint job. We also replaced the driver side window regulator, and rear bumper cover. The customer decided to go with our Two Stage Urethane Base Coat/Clear Coat paint. We also sanded out any minor chips and scratches around the car and the delaminating paint on the top of the car. First we replaced the window regulator to avoid scratching fresh paint. After we started the sanding process, once everything was completed we masked off anything that was not being painted the same color of the car, and it was ready for paint! Looks like a brand new car!
